Coaster


I was inspired by some end grain chopping boards I saw on you tube to try and recreate some of the techniques with the laser cutter. This coaster was made by cutting the basic outline with the laser and then cutting across it with the ribbon pattern. The cut was made in two lines removing a chunk 0.8mm wide, a single layer of veneer was inserted into the gap and then the coaster was glue shut again. The second set of ribbons (overlapping the first) were cut once the glue had dried. The second line of veneer was inserted and the whole thing sanded up to a nice finish. (svg here).





Popular posts from this blog

Wiring the Ruida Controller

Rainbow Puzzle Box

Laser Cut Cryptex