Saturday, 21 May 2016

Massive DM Screen


After posting my dice tower prototype to my geeky gaming friends on Facebook I was asked to make a DM screen. The idea fit well into the existing tower design, I could make a double tower, one pointing in and one pointing out, and separate them with the actual screens. Once the screens and baffles are removed they can all fold up neatly and be placed inside the tower. This design makes copious use of the pin hinge and is way too time consuming to be put into production, it needs a new hinge type integrated into the design 





Friday, 20 May 2016

Baffling Improvements (Dice Tower 2)


I knew I could get the baffling to be a lot flatter, in theory the thinnest it could be is the same as the material thickness. I replaced the hinges with some of these pin hinges that I've used previously. These were a bit of a faff to build but very effective at slimming the design down. These baffles fit the test tower perfectly and we very easy to remove. 



Thursday, 19 May 2016

Dice Tower 1


Way back in July I was trying to make a dice tower, there are a lot of laser cut dice towers available online and they all suffer from issues in one way or another. A lot of them use friction fits which will eventually wear down, some use expensive magnets and still take a while to set up so I started looking at my own design.

 
A dice tower is just a box that could potentially fold flat, the only thing that stops it folding like a regular box are the baffles that the dice fall down. I built a basic box tower but made my baffles removable. When inside the box the baffles push against the sides of the box and holds the whole thing rigid. When removed the baffles fold flat alongside the box.


As a concept it worked fairly well except the baffles didn't fold particularly flat which is why I carried on developing the idea rather than blogging it at the time.



Vale Box


Ruth drew me an amazing piece of art to go on the top of my vale box, vale happened at the weekend so now I feel like I can show it off to you guys. It's done with traditional pyromancy rather than lasered but it's lovely, exactly what I wanted for the box.



Tuesday, 17 May 2016

Geek Cake


This is the cake that the flux capacitor ended up in, it takes elements from lots of scifi series and shows. There are lots more pictures over on facebook. Halfway down the cake you'll notice some coloured pillars between the layers, we realised that we could turn the transparent cake frame into mini lightsabers so I illuminated them with neopixels and made them turn on/off over time.


Welsh Masters Belt


As a very rush job last week I made a belt for the welsh regionals of colossal mania. It was last seen headed off to be painted and glued, when a photo surfaces I'll post it up here too.