Project #4: Major Blacknose Modifications


In addition to my open source controllers for the Blacknose Laser cutter I'm giving my machine a major overhaul. As you can just about make out I'm taking all the parts off of the machine on the right hand side and placing them all on the plate on the left. This should reduce the height of a Blacknose by about 50%. It'll also leave a hole right through the base of the machine so in theory you could just put the laser in the middle of an extra large sheet and let it cut that.

Now all I need to do is figure out where I'm going to rehouse the extraction and all of the control electronics which currently live in the base, no big deal really :P



Popular posts from this blog

Wiring the Ruida Controller

Rainbow Puzzle Box

Laser Cut Cryptex